Concealed Cistern 15cm (UP200)
Geberit Kappa Concealed Cistern 15cm UP200 With Extended Flush Pipe.
Geberit Kappa Concealed Cistern 15cm UP200 Supplied with extended flush pipe Suitable for use with back to wall floor-standing WCs This cistern has the tendency to operate on dual flush system with kappa flush plates or with pneumatic and mechanical buttons.
The cistern can be single flush with pneumatic buttons Suitable for concealed installation Cistern with front or top actuation Installation depth adjustable 18 cm - 24.5cm
Protection housing for service opening can be cut to length
Cistern is fully insulated against condensation Water supply connection is left side
Connection hose to angle stop valve can be screw-connected by hand
Includes flush bend, welded
Quick adjustment of the actuator rods for flush plate
Installation height 980mm
To reduce flush volume to either 4.5/3 litre dual flush or 4/2.6 litre dual flush requires material number 242.310.00.1 (Note: must be used with pans designed for low volume flush)
The cistern can be worked with used water (rainwater) provided it is passed through a filter system first Flush plate can be purchased separately Installation instruction provided, download PDF from technical tab Technical Details:
Flow pressure range: 0.1-10 bar Operating temperature water max.: 25 °C Flush volume small range: 3-4 l Flush volume factory setting: 5.8 and 3 l Plumbing System:
Water supply connection R 1/2" male BSP parallel thread with integrated angle stop valve Protection housing for service opening Protection plug for flush bend WC connection set, dia 90mm 2 fastening brackets, pre-mounted Fastening material